Eric,
Install dir is the dir where you installed Open Blue Lab, not eXist.
You don't have to create a /db collection in Exist. It's the default
collection in which you are when you log in.
The data to import is not the one stored in openbluelab/.../. They are
old data. I will update this afternoon the right data to import.
Paths you put in conf.xml must exist. If it's not the case you have to
adapt them. For example, I think in conf.xml you have
/opt/www/openbluelab/dev/bluexml/data. If you are under windows, bluexml
does not exist because it is a symbolic link. Then, you have to change
bluexml in cms.
Send me your conf.xml file, I will have a look at it.
JC
Eric Cambray wrote:
Thanks,
we follow the tutorial but we've got some problems with the installation
& configuration :
*Install Dir*
- We replace all the "/opt/www/openbluelab/dev" with our install
directory (here : "/opt/local/openbluelab/OpenBlueLab-1.0.1/" )
So we have things like this :
<rsh_root>
<name>rsh_root</name>
<description>Restricted shell directory</description>
<value>/opt/local/openbluelab/OpenBlueLab-1.0.1/bluexml/rsh</value>
</rsh_root>
(each time the "/opt/www/openbluelab/dev" appear we change it).
Is the correct directory? (or do we have to use the eXist directory?)
*Database*
We create a database in eXist :
- First by creating a new collection name "db", a second in this one
name "openbluelab" and a final one in this one name www.openbluelab.org.
We import data (but it's not specify which file to use so we use the
__content__.xml file locate in
"openbluelab/populate/exist/db/bluexml/www.bluexml.org". Is the right
file? We also try with the same file locate in
"openbluelab/populate/exist/db/bluexml" but with the same result.
When we go to http://www.lan.openbluelab.org:8888/content/ (after change
the hosts file, starting eXist and openbluelab) we've got a blank page.
Note : in the tutorial some errors :
run.sh cocoon 8888 : This command doesn't work on linux. We use sh run.sh
In import data : www.lan.openbluelab.og
Thanks
Eric
Jean-Christophe Kermagoret a écrit :
An installation procedure has been written. It can be accessed on the
main menu.
HTH,
Jean-Christophe
Eric Cambray wrote:
Yes, eXist is running (127.0.0.1:8080) and the JDK is the 1.5 version.
The run.sh (in bin directory) start but at the 127.0.0.1:8888 adress
we have nothing. Only a blank page.
We try to launch build.sh (in openbluelab directory) but we've got
this message :
/tools/bin/ant -logger org.apache.tools.ant.NoBannerLogger -emacs
build.sh: tools/bin/ant: /bin/sh^M: bad interpreter: Aucun fichier ou
répertoire de ce type/
Is there anything else to do to launch Open Blue Lab?
Thanks
Eric
Jean-Christophe Kermagoret a écrit :
Hello,
have you installed the last eXist snapshot and the last jdk1.5 ?
They are required for OBL to work.
JC
Eric Cambray wrote:
Hello, we've got some issue with the Open Blue Lab install.
When opening the OpenBlueLab-1.0.1.tgz we have an issue to install it.
We untar the archive but we don't know where start the install. We
found a readme file in the openbluelab directory but we can't find
the bluexml-installer.jar in the untar archive.
We also tried to start directly by running the run.sh file in the
openbluelab/bin directory, all seems to be good but in our
webbrowser we have a blank page at 127.0.0.1:8888. After a ctrl+c
the process aren't stopped.
Thanks
Eric
_______________________________________________
User mailing list
User-E0IXfuzpajFHgg9j4ji3+w@xxxxxxxxxxxxxxxx
http://mlm.triglyphe.com/mailman/listinfo/user
------------------------------------------------------------------------
_______________________________________________
User mailing list
User-E0IXfuzpajFHgg9j4ji3+w@xxxxxxxxxxxxxxxx
http://mlm.triglyphe.com/mailman/listinfo/user
_______________________________________________
User mailing list
User-E0IXfuzpajFHgg9j4ji3+w@xxxxxxxxxxxxxxxx
http://mlm.triglyphe.com/mailman/listinfo/user
--
Jean-Christophe Kermagoret
jck-v3FNGYKZ9cyNvCAlj6F9uA@xxxxxxxxxxxxxxxx
|
