Hi,
i have a very strange setup :-)
I have two identical servers both running a torque-server and a
torque-scheduler, and only one node running the mom.
There is only one server at a time accesible, but it gets swapped periodically
by the other server.
You can think of it like that:
Server1----|
|-----------Node
Server2----
The servers get switched dynamically while both are running.
If Server1 is booted (and accessible) it takes about 15 seconds till the node
gets marked as free.
If i dynamically switch to Server2 after some time it takes about 3:15 minutes
till the node gets marked as free.
That is far to long for my case, i want the node to be recognized as free as
soon as possible...
I have looked through the configurations, but did not find anything suitable.
I have set server node_ping_rate to 5 and tested several node_check_rates
without any change in behaviour.
On node-side i have set $status_update_time to 5 seconds, but it is still not
recognized as free earlier.
What i am missing?
Thank you,
Julian
|
