RE:U-Boot Not Loading Successfully

Sam,
    I'm not sure what reset vector is.  I am assuming
 that you are talking about CFG_RESET_ADDRESS, which
 I
 have set to 0x80000000.  I'm not sure exactly what
 to
 set that to, since some board configuration files
 tell
 you to set it to a known invalid address, and then
 some have it set to flash base plus 0x100.  Also,
 the
 speed of the flash I am using is a 70ns flash
 device.
 
 Thanks for the help!

> 
> --- SAM SONG <samsongshu@xxxxxxxxxxxx> wrote:
> > Date: Wed, 31 Dec 2003 13:21:29 -0800 (PST)
> > From: Jeff Stevens <jsteve17@xxxxxxxxx>
> > To: u-boot-users@xxxxxxxxxxxxxxxxxxxxx
> > Subject: [U-Boot-Users] U-Boot Not Loading
> > Successfully
> > 
> > 
> > I am porting U-Boot over to a new product and am
> > having some difficulty getting U-Boot to load
> > successfully.  I have placed our board on a logic
> > analyzer and found (based on System.map) that
> U-Boot
> > seems to crash in cpu/mpc8xx/cpu_init.c in
> function
> > cpu_init_f at lines:
> > 
> > memctl->memc_br0 = CFG_BR0_PRELIM;
> > memctl->memc_or0 = CFG_OR0_PRELIM;
> > 
> > Here is my board configuration:
> > CPU:   MPC855T
> > FLASH: AMD AM29LV040B (512kB 8-bit on CS0)
> > SDRAM: Micron MT48LC4M32 (16MB 32-bit on CS2)
> > NVRAM: Simtek STK14C88 (32kB 8-bit on CS4)
> > 
> > The board is set to have the IMMR come up at
> > 0xFF000000 (on hard reset), and that is what I
> have
> > CFG_IMMR set to in my board configuration file. 
> > Could
> > this be a problem with the placement of the IMMR. 
> I
> > previously had the IMMR at 0x00000000 on hard
> reset
> > and then moved it to 0xFA200000 with CFG_IMMR,
> which
> > had the same effect.  Or, could this be an issue
> > with
> > my BR0 and OR0 settings? 
> > 
> >
> ---------------------------------------------------
> > Both settings on CFG_IMMR are OK.Only you set
> > CFG_IMMR
> > on 0xFFF80000 would have some problems.I guess
> your
> > trouble don't relate with CFG_IMMR settings.
> >
> ---------------------------------------------------
> > 
> >  I read something in that
> > file before those two lines above, which talked
> > about
> > CFG_OR0_REMAP, but didn't quite understand it. 
> > Should
> > I be using this?
> > 
> > Here are my BRx, ORx settings:
> > #define FLASH_BASE_PRELIM     0xFFF80000
> > #define CFG_PRELIM_OR_AM      0xFFFF0000
> > #define CFG_OR_TIMING_FLASH   (OR_CSNT_SAM |
> > OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX |
> > OR_EHTR)
> > 
> > -----------------------------------------------
> > Pls tell us the FLASH SPEED or we cannot check the
> > OR0
> > configuration for you.Meanwhile,what's your reset
> > vector prefix?0x0000 or 0xfff0?
> > ------------------------------------------------
> > 
> > #define CFG_OR0_PRELIM            (CFG_PRELIM_OR_AM |
> > CFG_OR_TIMING_FLASH)
> > #define CFG_BR0_PRELIM            ((FLASH_BASE_PRELIM &
> > BR_BA_MSK) | (BR_PS_8 & BR_PS_MSK) | BR_V)
> > 
> > 
> > #define SDRAM_BASE_PRELIM     0x00000000
> > #define SDRAM_MAX_SIZE        0x01000000
> > 
> > #define CFG_OR_TIMING_SDRAM   (OR_G5LA | OR_G5LS)
> > #define CFG_OR2_PRELIM        (CFG_PRELIM_OR_AM |
> > CFG_OR_TIMING_SDRAM )
> > #define CFG_BR2_PRELIM        ((SDRAM_BASE_PRELIM
> &
> > BR_BA_MSK) | BR_MS_UPMA | BR_V )
> > 
> > #define CFG_NVRAM_BASE        0xFA000000
> > #define CFG_OR4_PRELIM        (CFG_PRELIM_OR_AM |
> > CFG_OR_TIMING_FLASH)
> > #define CFG_BR4_PRELIM        ((CFG_NVRAM_BASE &
> > BR_BA_MSK) | (BR_PS_8 & BR_PS_MSK) | BR_V |
> OR_EHTR)
> > 
> > I would appreciate anyones input, since I'm not
> too
> > familiar with the U-Boot beyond the board specific
> > files.
> > 
> > Thanks in advance!
> > 
> > ------------------------------------------
> > 
> > Best regards,
> > 
> > SAM
> > 
> > 
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam?  Yahoo! Mail has the best spam
> > protection around 
> > http://mail.yahoo.com 
> 
> 
> __________________________________
> Do you Yahoo!?
> New Yahoo! Photos - easier uploading and sharing.
> http://photos.yahoo.com/
> 


__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/


-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click