Hi!
I had some troubles since I updated the kernels on my two machines from
2.4.20-mh3 (I think) to 2.4.21-mh2. I was able to connect only after both usb
bluetooth dongles had been connected, and for a short while. Then I would get
a ACL TX timeout on the PANU machine, and would never be able to connect until
I disconnected and reconnected the dongle on the PAN machine. So, I decided to
update SDP from 1.1 to 1.2, all other packages were already up to date (utils
2.3, libs 2.4, pan 1.1). Now I am always unable to connect, and no message is
bening shown. I deleted both link_key files, restarted bluetooth on both
machines, and got asked for the link key, but I am still unable to connect.
Here are the relevant entries from syslog on the panu machine:
[...]
Jun 20 20:06:15 [pand] Inquiring
Jun 20 20:06:15 [pand] Searching for NAP on 00:10:DC:AF:E1:13
Jun 20 20:06:16 [hcid] link_key_request (sba=0E:96:32:57:60:00, dba=13:E1:AF:DC:
10:00)
Jun 20 20:06:22 [pand] Inquiring
Jun 20 20:06:35 [pand] Searching for NAP on 00:10:DC:AF:E1:13
Jun 20 20:06:35 [hcid] link_key_request (sba=0E:96:32:57:60:00, dba=13:E1:AF:DC:
10:00)
Jun 20 20:06:41 [pand] Inquiring
Jun 20 20:06:41 [pand] Searching for NAP on 00:10:DC:AF:E1:13
Jun 20 20:06:42 [hcid] link_key_request (sba=0E:96:32:57:60:00, dba=13:E1:AF:DC:
10:00)
[...]
And the PAN machine shows the corresponding "[hcid] link_key_request" entries.
hciconfig -a (PANU machine, ACER dongle)
hci0: Type: USB
BD Address: 00:60:57:32:96:0E ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN AUTH ENCRYPT
RX bytes:13247 acl:325 sco:0 events:947 errors:0
TX bytes:10516 acl:325 sco:0 commands:314 errors:0
Features: 0xff 0xff 0x0b 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'Port-Jbs (0)'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver: 0x175
Manufacturer: Cambridge Silicon Radio (10)
hciconfig -a (PAN machine, MSI dongle)
hci0: Type: USB
BD Address: 00:10:DC:AF:E1:13 ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN AUTH ENCRYPT
RX bytes:11221 acl:260 sco:0 events:844 errors:0
TX bytes:7416 acl:260 sco:0 commands:219 errors:0
Features: 0xff 0xff 0x0f 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'Jbs_Linux (0)'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d
Manufacturer: Cambridge Silicon Radio (10)
The ACER isn't able to update the firmware (always times out).
Any ideas?
Thanks!
---
Jose Bernardo B R Silva | Source Mage GNU/Linux Section Guru
jbernardo@xxxxxxxxxxxxxx | http://www.sourcemage.org
http://counter.li.org #245602
http://cosmos.oninetspeed.pt/jose.bernardo
jbs@xxxxxxxxxxxxxxxxxxxx
-------------------------------------------------------
This SF.Net email is sponsored by: INetU
Attention Web Developers & Consultants: Become An INetU Hosting Partner.
Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission!
INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php
|
