OSDir


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Status of Demo Server on Apache VM Infrastructure


Thanks, Alex,

I can see web app is running but I can't log in with the credentials that
you shared earlier

Tenant : playground
Username : operator
Password : init1@l

Thanks

On Wed, Jun 13, 2018 at 12:32 AM Aleksandar Vidakovic <
cheetah@xxxxxxxxxxxxxxxxx> wrote:

> Hi all,
>
> ... sweeeet! I got a considerable step further.
>
> @Markus: thanks for the conversation... gave me an idea how to fix (most
> of) it!
>
> The problem was - as suspected - the memory (or lack of). The VM instance
> at Apache has net 30G available. 16G are needed for Cassandra and in my
> previous tests I tried to run the demo server with up to 16G. The problem
> is that the demo server needs considerably more memory than 16G. According
> to my observation it's around 23-24G. Even if you limit the demo server
> memory allocation with "-Xmx" to 12G (for example) it would just continue
> to consume more memory.
>
> My solution: add a swap file. Not ideal in terms of performance, but it
> gets the whole thing going... at least mostly (please read on).
>
> Current status:
>
>    - Cassandra (and all other Docker containers) are still running;
>    Cassandra died in my previous attempts at the latest when the Teller
>    application started, but with the swap file it's still running
>    - all Spring Boot apps are starting now
>    - I get once in a while some spurious timeouts (I think when either the
>    Eureka server is contacted or the config server)
>    - there are also sometimes exceptions concerning MySQL connections, but
>    doesn't seem to matter overall
>    - I could issue an authentication request with Postman to
>    http://fineract-vm.apache.org:2021/identity/v1; just to test if
> anything
>    is responding
>    - PROBLEM: but the demo server (the Spring Boot apps) eventually dies
>    after a couple of minutes; I don't think that the memory is the problem
> at
>    this point; I think it's more of a timeout problem concerning the
>    communication with Eureka and/or the config server (maybe because the
>    system is a bit slow)
>
> ... and here the memory footprint ("free -h") when everything is running,
> just FYI:
>
>               total        used        free      shared  buff/cache
>  available
> Mem:            31G         31G        226M        8.4M        169M
>  47M
> Swap:           15G        6.8G        9.2G
>
> ... after the Payroll application is started (approx.) I see these
> exceptions appearing in the logs (a whole series of them):
>
> 18:19:36.465 [AsyncResolver-bootstrap-executor-0] INFO
> c.n.d.s.r.aws.ConfigClusterResolver - Resolving eureka endpoints via
> configuration
> Resolving artifact
> org.apache.fineract.cn.group:service-boot:jar:0.1.0-BUILD-SNAPSHOT
> Resolving metadata
>
> org.apache.fineract.cn.group:service-boot:0.1.0-BUILD-SNAPSHOT/maven-metadata.xml
> from /root/.m2/repository (enhanced)
> Resolved metadata
>
> org.apache.fineract.cn.group:service-boot:0.1.0-BUILD-SNAPSHOT/maven-metadata.xml
> from /root/.m2/repository (enhanced)
> Resolved artifact
> org.apache.fineract.cn.group:service-boot:jar:0.1.0-BUILD-SNAPSHOT from
> /root/.m2/repository (enhanced)
> 18:19:44.689 [DiscoveryClient-0] ERROR c.n.discovery.TimedSupervisorTask -
> task supervisor timed out
> java.util.concurrent.TimeoutException: null
> at java.util.concurrent.FutureTask.get(FutureTask.java:205)
> at
> com.netflix.discovery.TimedSupervisorTask.run(TimedSupervisorTask.java:64)
> at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511)
> at java.util.concurrent.FutureTask.run(FutureTask.java:266)
> at
>
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$201(ScheduledThreadPoolExecutor.java:180)
> at
>
> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:293)
> at
>
> java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
> at
>
> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
> at java.lang.Thread.run(Thread.java:748)
>
> ... but it still seems to have no problem starting the next app (Group) and
> things look good for a while...
>
> ... until suddenly it seems that app instances are beginning to shutdown...
> and I'm not sure why this happens:
>
> 18:27:19.603 [AsyncResolver-bootstrap-executor-0] INFO
> c.n.d.s.r.aws.ConfigClusterResolver - Resolving eureka endpoints via
> configuration
> 18:27:39.974 [qtp1631119258-22] INFO  c.datastax.driver.core.ClockFactory -
> Using native clock to generate timestamps.
> 18:27:39.975 [qtp1631119258-22] WARN  c.datastax.driver.core.CodecRegistry
> - Ignoring codec LocalDateTimeCodec [timestamp <-> java.time.LocalDateTime]
> because it collides with previously registered codec LocalDateTimeCodec
> [timestamp <-> java.time.LocalDateTime]
> 18:27:41.309 [qtp1631119258-22] INFO  c.d.d.c.p.DCAwareRoundRobinPolicy -
> Using data-center name 'datacenter1' for DCAwareRoundRobinPolicy (if this
> is incorrect, please provide the correct datacenter name with
> DCAwareRoundRobinPolicy constructor)
> 18:27:41.319 [qtp1631119258-22] INFO  com.datastax.driver.core.Cluster -
> New Cassandra host /127.0.0.1:9042 added
> 18:27:41.661 [AsyncResolver-bootstrap-executor-0] INFO
> c.n.d.s.r.aws.ConfigClusterResolver - Resolving eureka endpoints via
> configuration
> 18:27:51.110 [Thread-15] INFO
> o.s.b.c.e.AnnotationConfigEmbeddedWebApplicationContext - Closing
>
> org.springframework.boot.context.embedded.AnnotationConfigEmbeddedWebApplicationContext@11438d26
> :
> startup date [Tue Jun 12 17:55:35 UTC 2018]; parent:
>
> org.springframework.context.annotation.AnnotationConfigApplicationContext@7dc5e7b4
> 18:27:51.341 [AsyncResolver-bootstrap-executor-0] INFO
> c.n.d.s.r.aws.ConfigClusterResolver - Resolving eureka endpoints via
> configuration
> 18:27:53.373 [Thread-15] INFO  o.s.c.s.DefaultLifecycleProcessor - Stopping
> beans in phase 2147483647
> 18:27:54.331 [Thread-15] INFO  o.s.c.s.DefaultLifecycleProcessor - Stopping
> beans in phase 0
> 18:27:54.736 [Thread-15] INFO  o.s.b.a.e.jmx.EndpointMBeanExporter -
> Unregistering JMX-exposed beans on shutdown
> 18:27:54.740 [Thread-15] INFO  o.s.b.a.e.jmx.EndpointMBeanExporter -
> Unregistering JMX-exposed beans
> 18:27:54.798 [Thread-15] INFO  o.s.j.e.a.AnnotationMBeanExporter -
> Unregistering JMX-exposed beans on shutdown
> 18:27:54.800 [Thread-15] INFO  o.s.j.e.a.AnnotationMBeanExporter -
> Unregistering JMX-exposed beans
> 18:27:54.937 [Thread-15] INFO
> o.s.o.j.LocalContainerEntityManagerFactoryBean - Closing JPA
> EntityManagerFactory for persistence unit 'metaPU'
> 18:27:58.376 [async-processor-1] INFO  o.f.c.internal.util.VersionPrinter -
> Flyway 3.2.1 by Boxfuse
> 18:27:58.677 [async-processor-1] INFO  o.f.c.i.dbsupport.DbSupportFactory -
> Database: jdbc:mysql://localhost:3306/seshat (MySQL 10.3)
> 18:28:00.620 [async-processor-1] INFO  o.f.core.internal.command.DbValidate
> - Validated 2 migrations (execution time 00:01.169s)
> 18:28:00.901 [Thread-15] INFO  o.e.jetty.server.AbstractConnector - Stopped
> ServerConnector@e162a35{HTTP/1.1,[http/1.1]}{0.0.0.0:2020}
> 18:28:01.268 [Thread-15] INFO  o.e.j.server.handler.ContextHandler -
> Stopped o.s.b.c.e.j.JettyEmbeddedWebAppContext@10850d17
>
> {/provisioner/v1,file:///tmp/jetty-docbase.5486166363042759626.2020/,UNAVAILABLE}
>
> ... the list is actually a lot longer... in the rest of the log you can see
> that one by one all the apps are shutting down.
>
> The last (error) entries I see are these:
>
> E18:29:31.278 [DefaultMessageListenerContainer-3] ERROR
> o.s.j.l.DefaultMessageListenerContainer - Could not refresh JMS Connection
> for destination 'cheques-v1' - retrying using FixedBackOff{interval=5000,
> currentAttempts=0, maxAttempts=unlimited}. Cause: Error while attempting to
> retrieve a connection from the pool; nested exception is
> javax.jms.JMSException: Could not connect to broker URL:
> tcp://localhost:61616. Reason: java.net.ConnectException: Connection
> refused (Connection refused)
>
> ... I guess an embedded ActiveMQ was also shutdown in the process of the
> previous errors.
>
> So far from here... any input on the above highly appreciated. Overall I
> think we are close.
>
> Cheers,
>
> Aleks
>
>
> On Tue, Jun 12, 2018 at 6:16 PM Markus Geiss <mage@xxxxxxxxxx> wrote:
>
> > One thing we maybe can do, given we are part of the Apache Family, is to
> > ask the Cassandra community for some suggestions.
> >
> > Cheers
> >
> > Markus
> >
> > On Tue, Jun 12, 2018 at 6:04 PM Markus Geiss <mage@xxxxxxxxxx> wrote:
> >
> > > Hey all,
> > >
> > > we are not running Cassandra in a container, we have dedicated VMs to
> run
> > > our cluster.
> > >
> > > Given this we are not the best persons to help here, sorry. (;
> > >
> > > Cheers
> > >
> > > Markus
> > >
> > > On Tue, Jun 12, 2018 at 10:35 AM Ed Cable <edcable@xxxxxxxxx> wrote:
> > >
> > >> Adding Patric directly to this thread too so he can give his input
> > >> regarding to the challenges with Cassandra.
> > >>
> > >> Ed
> > >> On Tue, Jun 12, 2018 at 12:53 AM Aleksandar Vidakovic <
> > >> cheetah@xxxxxxxxxxxxxxxxx> wrote:
> > >>
> > >>> Hi Victor,
> > >>>
> > >>> .... this is the relevant part of the docker-compose.yml file:
> > >>>
> > >>>   cassandra0:
> > >>>     image: cassandra:3.11.1
> > >>>     container_name: cassandra0
> > >>>     ports:
> > >>>       - 9042:9042
> > >>>       - 9160:9160
> > >>>       - 7199:7199
> > >>>       - 8778:8778
> > >>>     volumes:
> > >>>       - ./cassandra:/etc/cassandra
> > >>>     environment:
> > >>>       - CASSANDRA_START_RPC=true
> > >>>       - CASSANDRA_SEEDS=cassandra0
> > >>>       - CASSANDRA_CLUSTER_NAME=fineract_cluster
> > >>>     ulimits:
> > >>>       memlock: -1
> > >>>       nproc: 32768
> > >>>       nofile: 100000
> > >>>
> > >>> ... and just to be complete... here's the Docker service
> configuration
> > >>> ("/lib/systemd/system/docker.service"):
> > >>>
> > >>> [Unit]
> > >>> Description=Docker Application Container Engine
> > >>> Documentation=https://docs.docker.com
> > >>> After=network-online.target docker.socket firewalld.service
> > >>> Wants=network-online.target
> > >>> Requires=docker.socket
> > >>>
> > >>> [Service]
> > >>> Type=notify
> > >>> # the default is not to use systemd for cgroups because the delegate
> > >>> issues
> > >>> still
> > >>> # exists and systemd currently does not support the cgroup feature
> set
> > >>> required
> > >>> # for containers run by docker
> > >>> ExecStart=/usr/bin/dockerd -H fd://
> > >>> ExecReload=/bin/kill -s HUP $MAINPID
> > >>> LimitNOFILE=1048576
> > >>> # Having non-zero Limit*s causes performance problems due to
> accounting
> > >>> overhead
> > >>> # in the kernel. We recommend using cgroups to do container-local
> > >>> accounting.
> > >>> LimitNPROC=infinity
> > >>> LimitCORE=infinity
> > >>> LimitMEMLOCK=infinity
> > >>> # Uncomment TasksMax if your systemd version supports it.
> > >>> # Only systemd 226 and above support this version.
> > >>> TasksMax=infinity
> > >>> TimeoutStartSec=0
> > >>> # set delegate yes so that systemd does not reset the cgroups of
> docker
> > >>> containers
> > >>> Delegate=yes
> > >>> # kill only the docker process, not all processes in the cgroup
> > >>> KillMode=process
> > >>> # restart the docker process if it exits prematurely
> > >>> Restart=on-failure
> > >>> StartLimitBurst=3
> > >>> StartLimitInterval=60s
> > >>>
> > >>> [Install]
> > >>> WantedBy=multi-user.target
> > >>>
> > >>> ... the one tweak I did there is to set LimitMEMLOCK to infinity...
> do
> > >>> you
> > >>> think the problems are file handle related? Should I set LimitNOFILE
> > also
> > >>> to infinity?
> > >>>
> > >>> Appreciate the help.
> > >>>
> > >>> Cheers,
> > >>>
> > >>> Aleks
> > >>>
> > >>> On Tue, Jun 12, 2018 at 9:09 AM Victor Romero <
> > >>> victor.romero@xxxxxxxxxxxxxxx>
> > >>> wrote:
> > >>>
> > >>> > Hi Aleks,
> > >>> >
> > >>> > Can you share the ulimits flags that the cassandra's container is
> > using
> > >>> > while it is running?
> > >>> >
> > >>> > The values are being set in the composer file? Or in the upstart or
> > >>> > systemd docker's deamon config files?
> > >>> >
> > >>> >
> > >>> >
> > >>> > ⁣Enviado desde TypeApp ​
> > >>> >
> > >>> > En jun. 11, 2018 10:02 AM, en 10:02 AM, Aleksandar Vidakovic <
> > >>> > cheetah@xxxxxxxxxxxxxxxxx> escribió:
> > >>> > >... and I should have attached the Cassandra log dump... so here
> it
> > >>> > >is...
> > >>> > >
> > >>> > >On Mon, Jun 11, 2018 at 4:49 PM Aleksandar Vidakovic <
> > >>> > >cheetah@xxxxxxxxxxxxxxxxx> wrote:
> > >>> > >
> > >>> > >> Hi all,
> > >>> > >>
> > >>> > >> ... as you might have noticed I did a couple of restarts
> today...
> > >>> the
> > >>> > >> problem I am facing now: I can't get Cassandra to run in a
> stable
> > >>> > >way.
> > >>> > >>
> > >>> > >> Things look quite OK for a while when running the demo server,
> but
> > >>> > >then
> > >>> > >> suddenly Cassandra dies (sometimes it starts misbehaving with
> the
> > >>> > >deposit
> > >>> > >> microservice startup, sometimes with portfolio or teller). I
> tried
> > >>> to
> > >>> > >> increase the memory (4G, 8G and 16G) and set some Docker limits
> to
> > >>> > >> "infinity" (especially LimitMEMLOCK).
> > >>> > >>
> > >>> > >> I've attached Cassandra's log dump... maybe someone can help out
> > >>> > >here? Is
> > >>> > >> it even possible to run Fineract CN on 32GB of memory?
> > >>> > >>
> > >>> > >> Other than that the setup would be ready to go... we just need
> to
> > >>> get
> > >>> > >the
> > >>> > >> database running more reliably.
> > >>> > >>
> > >>> > >> Cheers,
> > >>> > >>
> > >>> > >> Aleks
> > >>> > >>
> > >>> > >> On Mon, Jun 11, 2018 at 2:38 PM Aleksandar Vidakovic <
> > >>> > >> cheetah@xxxxxxxxxxxxxxxxx> wrote:
> > >>> > >>
> > >>> > >>> @Rajan: I had to restart it again (needed to add some
> additional
> > >>> > >reverse
> > >>> > >>> proxy configuration for the web UI to work)... and there were
> > more
> > >>> > >>> exceptions that I hope will be fixed now.
> > >>> > >>>
> > >>> > >>> Just FYI
> > >>> > >>>
> > >>> > >>> On Mon, Jun 11, 2018 at 1:47 PM Aleksandar Vidakovic <
> > >>> > >>> cheetah@xxxxxxxxxxxxxxxxx> wrote:
> > >>> > >>>
> > >>> > >>>> No prob.... Let me know how it goes... Can get back to testing
> > >>> only
> > >>> > >>>> later tonight.
> > >>> > >>>>
> > >>> > >>>> Cheers
> > >>> > >>>>
> > >>> > >>>>
> > >>> > >>>> On Mon, Jun 11, 2018, 1:45 PM Rajan Maurya
> > >>> > ><rajanmaurya154@xxxxxxxxx>
> > >>> > >>>> wrote:
> > >>> > >>>>
> > >>> > >>>>> Sorry missed the 30 min, I will test after 30 min.
> > >>> > >>>>>
> > >>> > >>>>> Big thanks for this 🙂
> > >>> > >>>>>
> > >>> > >>>>>
> > >>> > >>>>>
> > >>> > >>>>>
> > >>> > >>>>> On Mon, Jun 11, 2018 at 5:12 PM Aleksandar Vidakovic <
> > >>> > >>>>> cheetah@xxxxxxxxxxxxxxxxx> wrote:
> > >>> > >>>>>
> > >>> > >>>>> > @Rajan: can't see the image you posted.
> > >>> > >>>>> >
> > >>> > >>>>> > ... and as I said: the services are still starting... and
> the
> > >>> > >best
> > >>> > >>>>> estimate
> > >>> > >>>>> > I have right now (as already mentioned): 30min
> > >>> > >>>>> >
> > >>> > >>>>> > On Mon, Jun 11, 2018 at 1:40 PM Rajan Maurya <
> > >>> > >>>>> rajanmaurya154@xxxxxxxxx>
> > >>> > >>>>> > wrote:
> > >>> > >>>>> >
> > >>> > >>>>> > > [image: image.png]
> > >>> > >>>>> > >
> > >>> > >>>>> > >
> > >>> > >>>>> > >
> > >>> > >>>>> > >
> > >>> > >>>>> > >
> > >>> > >>>>> > > On Mon, Jun 11, 2018 at 5:08 PM Rajan Maurya <
> > >>> > >>>>> rajanmaurya154@xxxxxxxxx>
> > >>> > >>>>> > > wrote:
> > >>> > >>>>> > >
> > >>> > >>>>> > >> [image: image.png]
> > >>> > >>>>> > >> I am getting this.
> > >>> > >>>>> > >>
> > >>> > >>>>> > >>
> > >>> > >>>>> > >>
> > >>> > >>>>> > >>
> > >>> > >>>>> > >>
> > >>> > >>>>> > >> On Mon, Jun 11, 2018 at 5:05 PM Aleksandar Vidakovic <
> > >>> > >>>>> > >> cheetah@xxxxxxxxxxxxxxxxx> wrote:
> > >>> > >>>>> > >>
> > >>> > >>>>> > >>> Hi all,
> > >>> > >>>>> > >>>
> > >>> > >>>>> > >>> so... the demo server is (almost) ready... it took me a
> > >>> > >moment
> > >>> > >>>>> and a
> > >>> > >>>>> > >>> couple
> > >>> > >>>>> > >>> of restarts to figure out some boot failures... the
> > >>> services
> > >>> > >are
> > >>> > >>>>> quite
> > >>> > >>>>> > >>> resource hungry and default settings won't do it.
> > >>> > >>>>> > >>>
> > >>> > >>>>> > >>> The services are still starting and this will take a
> > while
> > >>> > >(my
> > >>> > >>>>> best
> > >>> > >>>>> > guess
> > >>> > >>>>> > >>> right now is around 30min or so).
> > >>> > >>>>> > >>>
> > >>> > >>>>> > >>> You can access the web UI at:
> > >>> > >http://fineract-vm.apache.org/login
> > >>> > >>>>> > >>>
> > >>> > >>>>> > >>> Credentials:
> > >>> > >>>>> > >>>
> > >>> > >>>>> > >>> Tenant : playground
> > >>> > >>>>> > >>> Username : operator
> > >>> > >>>>> > >>> Password : init1@l
> > >>> > >>>>> > >>>
> > >>> > >>>>> > >>> Note (to self): the safest way to compile this app  is
> > with
> > >>> > >NodeJS
> > >>> > >>>>> > 8.11.1
> > >>> > >>>>> > >>> (I tried with 10.3.0 before, won't work).
> > >>> > >>>>> > >>>
> > >>> > >>>>> > >>> ... and the webservices at:
> > >>> > >>>>> > >>>
> > >>> > >>>>> > >>> Identity Service:
> > >>> > >http://fineract-vm.apache.org:2021/identity/v1
> > >>> > >>>>> > >>> Office Service:
> > >>> http://fineract-vm.apache.org:2023/office/v1
> > >>> > >>>>> > >>> Customer Service:
> > >>> > >http://fineract-vm.apache.org:2024/customer/v1
> > >>> > >>>>> > >>> Accounting Service:
> > >>> > >>>>> http://fineract-vm.apache.org:2025/accounting/v1
> > >>> > >>>>> > >>> Portfolio Service:
> > >>> > >>>>> http://fineract-vm.apache.org:2026/portfolio/v1
> > >>> > >>>>> > >>> Deposit Service:
> > >>> > >http://fineract-vm.apache.org:2027/deposit/v1
> > >>> > >>>>> > >>> Teller Service:
> > >>> http://fineract-vm.apache.org:2028/teller/v1
> > >>> > >>>>> > >>> Reporting Service:
> > >>> > >>>>> http://fineract-vm.apache.org:2029/reporting/v1
> > >>> > >>>>> > >>> Cheque Service:
> > >>> > >http://fineract-vm.apache.org:2030/cheques/v1
> > >>> > >>>>> > >>> Payroll Service:
> > >>> > >http://fineract-vm.apache.org:2031/payroll/v1
> > >>> > >>>>> > >>>
> > >>> > >>>>> > >>> Note: restarting the services takes quite a while... if
> > you
> > >>> > >>>>> encounter
> > >>> > >>>>> > >>> connection problems retry a couple of minutes later to
> > >>> > >ensure I
> > >>> > >>>>> am not
> > >>> > >>>>> > >>> currently working on something.
> > >>> > >>>>> > >>>
> > >>> > >>>>> > >>> For the moment I'll restart the backend services once
> per
> > >>> > >day or
> > >>> > >>>>> so to
> > >>> > >>>>> > >>> reset the data; I guess we have to figure out how we
> want
> > >>> to
> > >>> > >>>>> handle
> > >>> > >>>>> > this
> > >>> > >>>>> > >>> (also concerning passwords etc.).
> > >>> > >>>>> > >>>
> > >>> > >>>>> > >>> If you have any suggestions where to put this demo
> server
> > >>> > >>>>> configuration
> > >>> > >>>>> > >>> then let me know here.
> > >>> > >>>>> > >>>
> > >>> > >>>>> > >>> Let me know if you encounter any problems (I have not
> > >>> > >extensively
> > >>> > >>>>> > tested
> > >>> > >>>>> > >>> it
> > >>> > >>>>> > >>> yet).
> > >>> > >>>>> > >>>
> > >>> > >>>>> > >>> Cheers,
> > >>> > >>>>> > >>>
> > >>> > >>>>> > >>> Aleks
> > >>> > >>>>> > >>>
> > >>> > >>>>> > >>>
> > >>> > >>>>> > >>> On Mon, Jun 11, 2018 at 12:00 PM Aleksandar Vidakovic <
> > >>> > >>>>> > >>> cheetah@xxxxxxxxxxxxxxxxx> wrote:
> > >>> > >>>>> > >>>
> > >>> > >>>>> > >>> > Progress! All the modules seem to be starting fine
> > now...
> > >>> > >just
> > >>> > >>>>> have
> > >>> > >>>>> > to
> > >>> > >>>>> > >>> > work on a couple of improvements on the config files.
> > >>> > >>>>> > >>> >
> > >>> > >>>>> > >>> > Currently having another stab to get the webapp
> > running.
> > >>> > >>>>> > >>> >
> > >>> > >>>>> > >>> > BTW: it should be fairly easy to adapt the simplistic
> > >>> > >Docker
> > >>> > >>>>> Compose
> > >>> > >>>>> > >>> file
> > >>> > >>>>> > >>> > for a CI pipeline.
> > >>> > >>>>> > >>> >
> > >>> > >>>>> > >>> > Will keep you posted.
> > >>> > >>>>> > >>> >
> > >>> > >>>>> > >>> > Cheers,
> > >>> > >>>>> > >>> >
> > >>> > >>>>> > >>> > Aleks
> > >>> > >>>>> > >>> >
> > >>> > >>>>> > >>> > On Mon, Jun 11, 2018 at 9:41 AM Aleksandar Vidakovic
> <
> > >>> > >>>>> > >>> > cheetah@xxxxxxxxxxxxxxxxx> wrote:
> > >>> > >>>>> > >>> >
> > >>> > >>>>> > >>> >> I am still working on it... Will ping you here when
> > it's
> > >>> > >ready
> > >>> > >>>>> (hope
> > >>> > >>>>> > >>> >> soon).
> > >>> > >>>>> > >>> >>
> > >>> > >>>>> > >>> >> On Mon, Jun 11, 2018, 9:40 AM Rajan Maurya <
> > >>> > >>>>> > rajanmaurya154@xxxxxxxxx>
> > >>> > >>>>> > >>> >> wrote:
> > >>> > >>>>> > >>> >>
> > >>> > >>>>> > >>> >>> Hi Alex,
> > >>> > >>>>> > >>> >>>
> > >>> > >>>>> > >>> >>> Is the demo server up, If yes then what's the base
> > url
> > >>> > >so I
> > >>> > >>>>> can
> > >>> > >>>>> > >>> access.
> > >>> > >>>>> > >>> >>>
> > >>> > >>>>> > >>> >>>
> > >>> > >>>>> > >>> >>>
> > >>> > >>>>> > >>> >>>
> > >>> > >>>>> > >>> >>> On Fri, Jun 8, 2018 at 2:03 PM Rajan Maurya <
> > >>> > >>>>> > >>> rajanmaurya154@xxxxxxxxx>
> > >>> > >>>>> > >>> >>> wrote:
> > >>> > >>>>> > >>> >>>
> > >>> > >>>>> > >>> >>> > Hi Alex,
> > >>> > >>>>> > >>> >>> >
> > >>> > >>>>> > >>> >>> > This is really great news, I will wait until
> then.
> > >>> > >>>>> > >>> >>> >
> > >>> > >>>>> > >>> >>> > Thanks
> > >>> > >>>>> > >>> >>> > Rajan Maurya
> > >>> > >>>>> > >>> >>> >
> > >>> > >>>>> > >>> >>> >
> > >>> > >>>>> > >>> >>> > On Fri, Jun 8, 2018 at 11:36 AM Aleksandar
> > Vidakovic
> > >>> <
> > >>> > >>>>> > >>> >>> > cheetah@xxxxxxxxxxxxxxxxx> wrote:
> > >>> > >>>>> > >>> >>> >
> > >>> > >>>>> > >>> >>> >> Hi Rajan,
> > >>> > >>>>> > >>> >>> >>
> > >>> > >>>>> > >>> >>> >> My plan is to get this up and running until
> > Monday.
> > >>> > >>>>> > >>> >>> >>
> > >>> > >>>>> > >>> >>> >> Cheers,
> > >>> > >>>>> > >>> >>> >>
> > >>> > >>>>> > >>> >>> >> Aleks
> > >>> > >>>>> > >>> >>> >>
> > >>> > >>>>> > >>> >>> >> On Fri, Jun 8, 2018, 7:23 AM Rajan Maurya <
> > >>> > >>>>> > >>> rajanmaurya154@xxxxxxxxx>
> > >>> > >>>>> > >>> >>> >> wrote:
> > >>> > >>>>> > >>> >>> >>
> > >>> > >>>>> > >>> >>> >> > Hi Markus, Mark, Myrle, Alex, Ed
> > >>> > >>>>> > >>> >>> >> >
> > >>> > >>>>> > >>> >>> >> > I am mentoring fineract-cn-mobile GSoC
> project.
> > I
> > >>> > >am
> > >>> > >>>>> waiting
> > >>> > >>>>> > for
> > >>> > >>>>> > >>> >>> this
> > >>> > >>>>> > >>> >>> >> demo
> > >>> > >>>>> > >>> >>> >> > server for a long time to see what's most
> > >>> important
> > >>> > >to
> > >>> > >>>>> > implement
> > >>> > >>>>> > >>> >>> in-app
> > >>> > >>>>> > >>> >>> >> > first.
> > >>> > >>>>> > >>> >>> >> > My GSoC students almost finished the task that
> > was
> > >>> > >>>>> necessary.
> > >>> > >>>>> > We
> > >>> > >>>>> > >>> >>> have
> > >>> > >>>>> > >>> >>> >> kinda
> > >>> > >>>>> > >>> >>> >> > of stuck and We really need this demo server
> and
> > >>> > >web app
> > >>> > >>>>> to
> > >>> > >>>>> > >>> assign
> > >>> > >>>>> > >>> >>> them
> > >>> > >>>>> > >>> >>> >> > tasks.
> > >>> > >>>>> > >>> >>> >> >
> > >>> > >>>>> > >>> >>> >> > It would be nice we can get the demo server up
> > >>> > >ASAP.
> > >>> > >>>>> > >>> >>> >> >
> > >>> > >>>>> > >>> >>> >> > Thanks
> > >>> > >>>>> > >>> >>> >> > Rajan Maurya
> > >>> > >>>>> > >>> >>> >> >
> > >>> > >>>>> > >>> >>> >> >
> > >>> > >>>>> > >>> >>> >> > On Fri, Jun 1, 2018 at 6:41 PM Mark van Veen <
> > >>> > >>>>> > >>> >>> mark.vanveen@xxxxxxxxx>
> > >>> > >>>>> > >>> >>> >> > wrote:
> > >>> > >>>>> > >>> >>> >> >
> > >>> > >>>>> > >>> >>> >> > > Hi Aleks,
> > >>> > >>>>> > >>> >>> >> > >
> > >>> > >>>>> > >>> >>> >> > > Re your second issue:
> > >>> > >>>>> > >>> >>> >> > >
> > >>> > >>>>> > >>> >>> >> > > It looks like that node-sass has not been
> > >>> > >installed
> > >>> > >>>>> > correctly.
> > >>> > >>>>> > >>> >>> Can you
> > >>> > >>>>> > >>> >>> >> > try
> > >>> > >>>>> > >>> >>> >> > > to remove the node_modules folder and run
> npm
> > >>> > >install
> > >>> > >>>>> again?
> > >>> > >>>>> > >>> This
> > >>> > >>>>> > >>> >>> >> should
> > >>> > >>>>> > >>> >>> >> > > run without errors.
> > >>> > >>>>> > >>> >>> >> > >
> > >>> > >>>>> > >>> >>> >> > > Mark
> > >>> > >>>>> > >>> >>> >> > >
> > >>> > >>>>> > >>> >>> >> > > On Thu, May 31, 2018 at 9:05 PM Courage
> Angeh
> > <
> > >>> > >>>>> > >>> >>> courageangeh@xxxxxxxxx
> > >>> > >>>>> > >>> >>> >> >
> > >>> > >>>>> > >>> >>> >> > > wrote:
> > >>> > >>>>> > >>> >>> >> > >
> > >>> > >>>>> > >>> >>> >> > > > Well, i can it with containerized MariaDB
> > and
> > >>> > >it
> > >>> > >>>>> work till
> > >>> > >>>>> > >>> my
> > >>> > >>>>> > >>> >>> >> computer
> > >>> > >>>>> > >>> >>> >> > > ran
> > >>> > >>>>> > >>> >>> >> > > > out of space (in the middle of
> provisioning)
> > >>> > >>>>> > >>> >>> >> > > >
> > >>> > >>>>> > >>> >>> >> > > > On Thu, May 31, 2018, 6:29 PM Victor
> Romero
> > <
> > >>> > >>>>> > >>> >>> >> > > victor.romero@xxxxxxxxxxxxxxx
> > >>> > >>>>> > >>> >>> >> > > > >
> > >>> > >>>>> > >>> >>> >> > > > wrote:
> > >>> > >>>>> > >>> >>> >> > > >
> > >>> > >>>>> > >>> >>> >> > > > > Hi Aleks,
> > >>> > >>>>> > >>> >>> >> > > > >
> > >>> > >>>>> > >>> >>> >> > > > > Could you please share the composer
> file?
> > >>> > >>>>> > >>> >>> >> > > > >
> > >>> > >>>>> > >>> >>> >> > > > > Courage,
> > >>> > >>>>> > >>> >>> >> > > > >
> > >>> > >>>>> > >>> >>> >> > > > > Have you tested Mifos while using
> MariaDb?
> > >>> > >>>>> > >>> >>> >> > > > >
> > >>> > >>>>> > >>> >>> >> > > > > I have faced issues while running Mifos
> > with
> > >>> > >>>>> MariaDb.
> > >>> > >>>>> > >>> >>> >> > > > >
> > >>> > >>>>> > >>> >>> >> > > > > Regards,
> > >>> > >>>>> > >>> >>> >> > > > >
> > >>> > >>>>> > >>> >>> >> > > > > Victor
> > >>> > >>>>> > >>> >>> >> > > > >
> > >>> > >>>>> > >>> >>> >> > > > > ⁣Enviado desde TypeApp ​
> > >>> > >>>>> > >>> >>> >> > > > >
> > >>> > >>>>> > >>> >>> >> > > > > En may. 31, 2018 6:10 AM, en 6:10 AM,
> > >>> Courage
> > >>> > >>>>> Angeh <
> > >>> > >>>>> > >>> >>> >> > > > > courageangeh@xxxxxxxxx> escribió:
> > >>> > >>>>> > >>> >>> >> > > > > >You are welcome :-)
> > >>> > >>>>> > >>> >>> >> > > > > >
> > >>> > >>>>> > >>> >>> >> > > > > >No, I am not.
> > >>> > >>>>> > >>> >>> >> > > > > >
> > >>> > >>>>> > >>> >>> >> > > > > >On Thu, May 31, 2018 at 11:57 AM,
> > >>> Aleksandar
> > >>> > >>>>> Vidakovic
> > >>> > >>>>> > <
> > >>> > >>>>> > >>> >>> >> > > > > >cheetah@xxxxxxxxxxxxxxxxx> wrote:
> > >>> > >>>>> > >>> >>> >> > > > > >
> > >>> > >>>>> > >>> >>> >> > > > > >> Hi Courage,
> > >>> > >>>>> > >>> >>> >> > > > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> ... ok... I see one difference that I
> > >>> > >have: I
> > >>> > >>>>> used
> > >>> > >>>>> > >>> MySQL
> > >>> > >>>>> > >>> >>> (as
> > >>> > >>>>> > >>> >>> >> > > > > >described on
> > >>> > >>>>> > >>> >>> >> > > > > >> the top of the Wiki page)... I'll try
> > >>> > >MariaDB
> > >>> > >>>>> and
> > >>> > >>>>> > >>> should
> > >>> > >>>>> > >>> >>> get
> > >>> > >>>>> > >>> >>> >> the
> > >>> > >>>>> > >>> >>> >> > > same
> > >>> > >>>>> > >>> >>> >> > > > > >> results as you.
> > >>> > >>>>> > >>> >>> >> > > > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> Thanks for providing your command
> > line, I
> > >>> > >used
> > >>> > >>>>> the
> > >>> > >>>>> > >>> same.
> > >>> > >>>>> > >>> >>> >> > > > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> Are you working on the same server?
> > >>> > >>>>> > >>> >>> >> > > > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> Cheers,
> > >>> > >>>>> > >>> >>> >> > > > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> Aleks
> > >>> > >>>>> > >>> >>> >> > > > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> On Thu, May 31, 2018 at 12:32 PM
> > Courage
> > >>> > >Angeh
> > >>> > >>>>> > >>> >>> >> > > > > ><courageangeh@xxxxxxxxx>
> > >>> > >>>>> > >>> >>> >> > > > > >> wrote:
> > >>> > >>>>> > >>> >>> >> > > > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> > Hi Aleksandar
> > >>> > >>>>> > >>> >>> >> > > > > >> >
> > >>> > >>>>> > >>> >>> >> > > > > >> > I containerized MariaDB and
> > Cassandra,
> > >>> > >and I
> > >>> > >>>>> passed
> > >>> > >>>>> > >>> it to
> > >>> > >>>>> > >>> >>> >> demo
> > >>> > >>>>> > >>> >>> >> > > > > >sever, it
> > >>> > >>>>> > >>> >>> >> > > > > >> > works fine.
> > >>> > >>>>> > >>> >>> >> > > > > >> > Here is the commad i use:
> > >>> > >>>>> > >>> >>> >> > > > > >> > java -Ddemoserver.provision=false
> > >>> > >>>>> > >>> >>> >> -Ddemoserver.persistent=true
> > >>> > >>>>> > >>> >>> >> > > > > >> >
> > >>> > >-Dcustom.cassandra.contactPoints=0.0.0.0:9142
> > >>> > >>>>> > >>> >>> >> > > > > >> > -Dcassandra.cluster.user=cassandra
> > >>> > >>>>> > >>> >>> >> > > -Dcassandra.cluster.pwd=password
> > >>> > >>>>> > >>> >>> >> > > > > >> > -Dcustom.mariadb.host=localhost
> > >>> > >>>>> > >>> >>> -Dcustom.mariadb.user=root
> > >>> > >>>>> > >>> >>> >> > > > > >> > -Dcustom.mariadb.password=mysql
> -jar
> > >>> > >>>>> > >>> >>> demo-server-0.1.0-BUILD-
> > >>> > >>>>> > >>> >>> >> > > > > >> SNAPSHOT.jar
> > >>> > >>>>> > >>> >>> >> > > > > >> >
> > >>> > >>>>> > >>> >>> >> > > > > >> > you might have to re-check the
> values
> > >>> > >you
> > >>> > >>>>> passed
> > >>> > >>>>> > for
> > >>> > >>>>> > >>> >>> >> cassandra
> > >>> > >>>>> > >>> >>> >> > and
> > >>> > >>>>> > >>> >>> >> > > > > >> mariadb.
> > >>> > >>>>> > >>> >>> >> > > > > >> >
> > >>> > >>>>> > >>> >>> >> > > > > >> > Thanks,
> > >>> > >>>>> > >>> >>> >> > > > > >> > Courage
> > >>> > >>>>> > >>> >>> >> > > > > >> >
> > >>> > >>>>> > >>> >>> >> > > > > >> >
> > >>> > >>>>> > >>> >>> >> > > > > >> >
> > >>> > >>>>> > >>> >>> >> > > > > >> >
> > >>> > >>>>> > >>> >>> >> > > > > >> > On Thu, May 31, 2018 at 12:02 AM,
> > >>> > >Aleksandar
> > >>> > >>>>> > >>> Vidakovic <
> > >>> > >>>>> > >>> >>> >> > > > > >> > cheetah@xxxxxxxxxxxxxxxxx> wrote:
> > >>> > >>>>> > >>> >>> >> > > > > >> >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > Hi all,
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > ... I made progress on the demo
> > >>> server
> > >>> > >>>>> > >>> installation:
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    - I've followed the
> > instructions @
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>>
> > https://cwiki.apache.org/confluence/display/FINERACT/
> > >>> > >>>>> > >>> >>> >> > > > > >> > > How+To+Build+Apache+Fineract+CN
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    - I've setup a minimal build
> > >>> > >environment
> > >>> > >>>>> @
> > >>> > >>>>> > >>> >>> >> > > > > >fineract-vm.apache.org
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    (Oracle JDK, Docker, Docker
> > >>> > >Compose,
> > >>> > >>>>> NodeJs
> > >>> > >>>>> > >>> 10.3.0,
> > >>> > >>>>> > >>> >>> NPM
> > >>> > >>>>> > >>> >>> >> > > 6.1.0)
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    - I've created a
> > >>> docker-compose.yml
> > >>> > >file
> > >>> > >>>>> to
> > >>> > >>>>> > >>> startup
> > >>> > >>>>> > >>> >>> >> > > Cassandra,
> > >>> > >>>>> > >>> >>> >> > > > > >MySQL
> > >>> > >>>>> > >>> >>> >> > > > > >> > and
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    NGinX (for
> > >>> > >fineract-cn-fims-web-app)
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    - all Java modules build
> > without a
> > >>> > >>>>> problem
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > ... but also hit some issues:
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    - I had to bump up the version
> > for
> > >>> > >>>>> > >>> @types/hammerjs
> > >>> > >>>>> > >>> >>> to
> > >>> > >>>>> > >>> >>> >> > 2.0.35
> > >>> > >>>>> > >>> >>> >> > > > > >(from
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    2.0.30), because the currently
> > >>> > >checked in
> > >>> > >>>>> > >>> version
> > >>> > >>>>> > >>> >>> could
> > >>> > >>>>> > >>> >>> >> not
> > >>> > >>>>> > >>> >>> >> > > be
> > >>> > >>>>> > >>> >>> >> > > > > >found
> > >>> > >>>>> > >>> >>> >> > > > > >> > by
> > >>> > >>>>> > >>> >>> >> > > > > >> > > npm
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    install; pull request is on
> the
> > >>> way
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    - the demo server seems to
> > listen
> > >>> > >on
> > >>> > >>>>> localhost
> > >>> > >>>>> > >>> only;
> > >>> > >>>>> > >>> >>> >> I'll
> > >>> > >>>>> > >>> >>> >> > > > > >"fix" this
> > >>> > >>>>> > >>> >>> >> > > > > >> > by
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    running it in a Docker
> container
> > >>> > >and
> > >>> > >>>>> will put
> > >>> > >>>>> > >>> the
> > >>> > >>>>> > >>> >>> >> > > > > >configuration in
> > >>> > >>>>> > >>> >>> >> > > > > >> the
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    docker-compose.yml file
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    - during the demo server
> > startup I
> > >>> > >get
> > >>> > >>>>> the
> > >>> > >>>>> > >>> following
> > >>> > >>>>> > >>> >>> >> > > exception
> > >>> > >>>>> > >>> >>> >> > > > > >(I've
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    shortened the stacktrace)...
> > >>> > >apparently
> > >>> > >>>>> the
> > >>> > >>>>> > >>> >>> connection
> > >>> > >>>>> > >>> >>> >> to
> > >>> > >>>>> > >>> >>> >> > the
> > >>> > >>>>> > >>> >>> >> > > > > >> database
> > >>> > >>>>> > >>> >>> >> > > > > >> > > is
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    missing a password although I
> > >>> > >followed
> > >>> > >>>>> the
> > >>> > >>>>> > >>> >>> instructions
> > >>> > >>>>> > >>> >>> >> and
> > >>> > >>>>> > >>> >>> >> > > > > >provided
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    passwords on the command line
> as
> > >>> > >>>>> parameters
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>>
> > >>> org.springframework.beans.factory.BeanCreationException:
> > >>> > >>>>> > >>> >>> >> Error
> > >>> > >>>>> > >>> >>> >> > > > > >> creating
> > >>> > >>>>> > >>> >>> >> > > > > >> > > bean with name
> > >>> > >'provisionerInitializer':
> > >>> > >>>>> > >>> Invocation of
> > >>> > >>>>> > >>> >>> init
> > >>> > >>>>> > >>> >>> >> > > > > >method
> > >>> > >>>>> > >>> >>> >> > > > > >> > failed;
> > >>> > >>>>> > >>> >>> >> > > > > >> > > nested exception is
> > >>> > >>>>> > >>> java.lang.IllegalStateException:
> > >>> > >>>>> > >>> >>> Could
> > >>> > >>>>> > >>> >>> >> not
> > >>> > >>>>> > >>> >>> >> > > > > >> initialize
> > >>> > >>>>> > >>> >>> >> > > > > >> > > service!
> > >>> > >>>>> > >>> >>> >> > > > > >> > > [... SNIP ... ]
> > >>> > >>>>> > >>> >>> >> > > > > >> > > Caused by:
> > >>> > >>>>> > >>> >>> >>
> org.mariadb.jdbc.internal.util.dao.QueryException:
> > >>> > >>>>> > >>> >>> >> > > > > >Could
> > >>> > >>>>> > >>> >>> >> > > > > >> not
> > >>> > >>>>> > >>> >>> >> > > > > >> > > connect: Access denied for user
> > >>> > >'root'@
> > >>> > >>>>> > >>> '172.18.0.1'
> > >>> > >>>>> > >>> >>> (using
> > >>> > >>>>> > >>> >>> >> > > > > >password:
> > >>> > >>>>> > >>> >>> >> > > > > >> NO)
> > >>> > >>>>> > >>> >>> >> > > > > >> > > at
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> >
> > >>> > >>>>> > >>> >>>
> > >>> > >org.mariadb.jdbc.internal.protocol.AbstractConnectProtocol.
> > >>> > >>>>> > >>> >>> >> > > > > >> authentication(
> > >>> > >>>>> > >>> >>> >> > > > > >> > > AbstractConnectProtocol.java:499)
> > >>> > >>>>> > >>> >>> >> > > > > >> > > at
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>>
> > >>> > >org.mariadb.jdbc.internal.protocol.AbstractConnectProtocol.
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>>
> > >>> handleConnectionPhases(AbstractConnectProtocol.java:447)
> > >>> > >>>>> > >>> >>> >> > > > > >> > > at
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > >
> > >>> > >>>>> > >>> >>> >>
> > >>> > >>>>> > >>>
> > >>> > >>>>>
> > >>> >
> >>org.mariadb.jdbc.internal.protocol.AbstractConnectProtocol.connect(
> > >>> > >>>>> > >>> >>> >> > > > > >> > > AbstractConnectProtocol.java:358)
> > >>> > >>>>> > >>> >>> >> > > > > >> > > at
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>>
> > >>> > >org.mariadb.jdbc.internal.protocol.AbstractConnectProtocol.
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> connectWithoutProxy(AbstractConnectProtocol.java:713)
> > >>> > >>>>> > >>> >>> >> > > > > >> > > at
> > >>> > >>>>> > >>> >>> >> > > > >
> > >>> > >>>>> > >>> >>> >>
> > >>> > >>>>> > >>>
> > >>> > >>>>>
> > >>> >
> >>org.mariadb.jdbc.internal.util.Utils.retrieveProxy(Utils.java:471)
> > >>> > >>>>> > >>> >>> >> > > > > >> > > at
> > >>> > >>>>> > org.mariadb.jdbc.Driver.connect(Driver.java:105)
> > >>> > >>>>> > >>> >>> >> > > > > >> > > ... 39 common frames omitted
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    - while running
> > >>> > >fineract-cn-fims-web-app
> > >>> > >>>>> in
> > >>> > >>>>> > dev
> > >>> > >>>>> > >>> mode
> > >>> > >>>>> > >>> >>> >> ("npm
> > >>> > >>>>> > >>> >>> >> > > run
> > >>> > >>>>> > >>> >>> >> > > > > >> dev") I
> > >>> > >>>>> > >>> >>> >> > > > > >> > >    got the following exceptions:
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > ERROR in
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> >
> > >>> > >>>>> ./src/app/accounting/financialCondition/financial-
> > >>> > >>>>> > >>> >>> >> > > > > >> condition.component.scss
> > >>> > >>>>> > >>> >>> >> > > > > >> > > Module build failed: Error:
> ENOENT:
> > >>> no
> > >>> > >such
> > >>> > >>>>> file
> > >>> > >>>>> > or
> > >>> > >>>>> > >>> >>> >> directory,
> > >>> > >>>>> > >>> >>> >> > > > > >scandir
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >>
> > >>> > >>>>> '/opt/build/integration-tests/fineract-cn-fims-web-app/node_
> > >>> > >>>>> > >>> >>> >> > > > > >> > > modules/node-sass/vendor'
> > >>> > >>>>> > >>> >>> >> > > > > >> > >     at Object.fs.readdirSync
> > >>> > >(fs.js:893:3)
> > >>> > >>>>> > >>> >>> >> > > > > >> > >     at
> Object.getInstalledBinaries
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >>
> > >>> > >>>>> (/opt/build/integration-tests/fineract-cn-fims-web-app/node_
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >modules/node-sass/lib/extensions.js:129:13)
> > >>> > >>>>> > >>> >>> >> > > > > >> > >     at foundBinariesList
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >>
> > >>> > >>>>> (/opt/build/integration-tests/fineract-cn-fims-web-app/node_
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> modules/node-sass/lib/errors.js:20:15)
> > >>> > >>>>> > >>> >>> >> > > > > >> > > [... SNIP ... ]
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > Anyone aware about the last two
> > >>> > >issues?
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > Thanks in advance and cheers,
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > Aleks
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > On Mon, May 28, 2018 at 5:17 PM
> > >>> > >Aleksandar
> > >>> > >>>>> > >>> Vidakovic <
> > >>> > >>>>> > >>> >>> >> > > > > >> > > cheetah@xxxxxxxxxxxxxxxxx>
> wrote:
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > > ... thanks Ed... I'm battling
> > with
> > >>> > >food
> > >>> > >>>>> > >>> poisoning,
> > >>> > >>>>> > >>> >>> but
> > >>> > >>>>> > >>> >>> >> hope
> > >>> > >>>>> > >>> >>> >> > to
> > >>> > >>>>> > >>> >>> >> > > > > >be
> > >>> > >>>>> > >>> >>> >> > > > > >> > > > functioning tomorrow again.
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > > I've put already an action list
> > >>> > >together
> > >>> > >>>>> and
> > >>> > >>>>> > will
> > >>> > >>>>> > >>> >>> try to
> > >>> > >>>>> > >>> >>> >> get
> > >>> > >>>>> > >>> >>> >> > > > > >> everything
> > >>> > >>>>> > >>> >>> >> > > > > >> > > > running with a "simple"
> > >>> > >docker-compose.yml
> > >>> > >>>>> > file.
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > > On Mon, May 28, 2018 at 4:20 PM
> > >>> > >Courage
> > >>> > >>>>> Angeh <
> > >>> > >>>>> > >>> >>> >> > > > > >> courageangeh@xxxxxxxxx>
> > >>> > >>>>> > >>> >>> >> > > > > >> > > > wrote:
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> Thanks for doing that Ed
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> On May 28, 2018 3:05 PM, "Ed
> > >>> Cable"
> > >>> > ><
> > >>> > >>>>> > >>> >>> edcable@xxxxxxxxx>
> > >>> > >>>>> > >>> >>> >> > > wrote:
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> Hi Aleks,
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> Just creating a new subject
> line
> > >>> on
> > >>> > >this
> > >>> > >>>>> > thread
> > >>> > >>>>> > >>> so
> > >>> > >>>>> > >>> >>> >> others
> > >>> > >>>>> > >>> >>> >> > can
> > >>> > >>>>> > >>> >>> >> > > > > >easily
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> follow.
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> Ed
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> ---------- Forwarded message
> > >>> > >---------
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> From: Ed Cable <
> > edcable@xxxxxxxxx
> > >>> >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> Date: Fri, May 25, 2018 at
> 8:42
> > AM
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> Subject: Re: Reducing Barriers
> > to
> > >>> > >Entry
> > >>> > >>>>> for
> > >>> > >>>>> > New
> > >>> > >>>>> > >>> >>> >> > Contributors
> > >>> > >>>>> > >>> >>> >> > > > > >WAS [
> > >>> > >>>>> > >>> >>> >> > > > > >> Re:
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> GSoC
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> 2018: Fineract CN SMS & Email
> > >>> > >>>>> Notifications]
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> To: Dev <
> > dev@xxxxxxxxxxxxxxxxxxx
> > >>> >,
> > >>> > >>>>> Aleksandar
> > >>> > >>>>> > >>> >>> >> Vidakovic <
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> cheetah@xxxxxxxxxxxxxxxxx>
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> Cc: Isaac Kamga
> > >>> > ><isaac.kamga@xxxxxxxxx>
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> Aleks,
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> Could you givean update to
> > >>> > >everybody on
> > >>> > >>>>> where
> > >>> > >>>>> > we
> > >>> > >>>>> > >>> >>> stand
> > >>> > >>>>> > >>> >>> >> with
> > >>> > >>>>> > >>> >>> >> > > > > >this and
> > >>> > >>>>> > >>> >>> >> > > > > >> > if
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> you're blocked, what
> assistance
> > >>> you
> > >>> > >need
> > >>> > >>>>> to
> > >>> > >>>>> > get
> > >>> > >>>>> > >>> >>> >> unblocked.
> > >>> > >>>>> > >>> >>> >> > > > > >This demo
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> server
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> infrastructure is critical for
> > >>> > >several
> > >>> > >>>>> of our
> > >>> > >>>>> > >>> >>> interns
> > >>> > >>>>> > >>> >>> >> and
> > >>> > >>>>> > >>> >>> >> > the
> > >>> > >>>>> > >>> >>> >> > > > > >work
> > >>> > >>>>> > >>> >>> >> > > > > >> > > they're
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> doing so the sooner we can
> have
> > it
> > >>> > >in
> > >>> > >>>>> place,
> > >>> > >>>>> > the
> > >>> > >>>>> > >>> >>> better.
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> Thanks for all your efforts on
> > >>> > >this,
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> Ed
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> On Mon, May 21, 2018 at 7:37
> AM
> > >>> > >>>>> Aleksandar
> > >>> > >>>>> > >>> >>> Vidakovic <
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> cheetah@xxxxxxxxxxxxxxxxx>
> > wrote:
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >>
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > Ok, will keep you posted
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > On Mon, May 21, 2018 at 4:19
> > PM
> > >>> > >Ed
> > >>> > >>>>> Cable <
> > >>> > >>>>> > >>> >>> >> > > edcable@xxxxxxxxx>
> > >>> > >>>>> > >>> >>> >> > > > > >> wrote:
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > > Aleks,
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > > The VM is now up as you
> > >>> > >probably saw
> > >>> > >>>>> from
> > >>> > >>>>> > >>> the
> > >>> > >>>>> > >>> >>> >> ticket in
> > >>> > >>>>> > >>> >>> >> > > on
> > >>> > >>>>> > >>> >>> >> > > > > >> Infra.
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> Chris
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > > provided this link for
> > getting
> > >>> > >sudo
> > >>> > >>>>> > access:
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > >
> > >>> > >>>>> > https://reference.apache.org/committer/opie
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > > Please update community on
> > >>> your
> > >>> > >>>>> progress
> > >>> > >>>>> > as
> > >>> > >>>>> > >>> a
> > >>> > >>>>> > >>> >>> >> number of
> > >>> > >>>>> > >>> >>> >> > > > > >interns
> > >>> > >>>>> > >>> >>> >> > > > > >> > are
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> eager
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > > to have this available in
> > >>> order
> > >>> > >to
> > >>> > >>>>> test
> > >>> > >>>>> > out
> > >>> > >>>>> > >>> the
> > >>> > >>>>> > >>> >>> work
> > >>> > >>>>> > >>> >>> >> > > > > >they're
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> undertaking.
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > > Ed
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > > On Tue, May 8, 2018 at
> 2:54
> > AM
> > >>> > >>>>> Aleksandar
> > >>> > >>>>> > >>> >>> Vidakovic
> > >>> > >>>>> > >>> >>> >> <
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > > cheetah@xxxxxxxxxxxxxxxxx
> >
> > >>> > >wrote:
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > > > Thanks Isaac... I'll
> have
> > a
> > >>> > >look
> > >>> > >>>>> at it
> > >>> > >>>>> > >>> tonight
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > > > On Mon, May 7, 2018,
> 1:02
> > PM
> > >>> > >Isaac
> > >>> > >>>>> > Kamga <
> > >>> > >>>>> > >>> >>> >> > > > > >> isaac.kamga@xxxxxxxxx
> > >>> > >>>>> > >>> >>> >> > > > > >> > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > wrote:
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > > > > Hi Alexsandar
> Vikakovic,
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > > > >
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > > > > Kindly take a look at
> > this
> > >>> > >>>>> request for
> > >>> > >>>>> > >>> the
> > >>> > >>>>> > >>> >>> >> Apache
> > >>> > >>>>> > >>> >>> >> > > > > >Fineract
> > >>> > >>>>> > >>> >>> >> > > > > >> CN
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> Ubuntu
> > >>> > >>>>> > >>> >>> >> > > > > >> > > >> > VM
> > >>> > >>>>> > >>> >>> >> >



-- 
*Thanks*
*Namaste*

Rajan Maurya
Contact Number : +91 9015090523
Github : @Github/therajanmaurya <https://github.com/therajanmaurya>,
LinkedIn: @LinkedIn/therajanmaurya
<https://www.linkedin.com/in/therajanmaurya/>